Home Energy Audit: Find Where Your House Is Losing Energy

A blower door test fan sealed into a doorway
A blower door test fan sealed into a doorway. Photo by Still_life_with_noodles, CC BY-SA 4.0, via Wikimedia Commons.
On this page
  1. Quick Answer
  2. What an Energy Audit Actually Finds
  3. Start With a DIY Walk-Through
  4. What a Professional Audit Includes
  5. Reading the Report: What to Fix First
  6. After the Audit: Keep the Momentum
  7. FAQ

Quick Answer

A home energy audit is a structured check of where your house wastes energy and what to fix first. Start with a do-it-yourself walk-through: review your energy bills, hunt for drafts, look at your insulation, and check your heating and cooling equipment. That usually shows you the biggest problems. Then decide whether to hire a professional auditor — they run a blower door test to measure how leaky your house is, scan the walls with an infrared camera, and give you a prioritised report with payback estimates.

Do the audit before you spend money on upgrades. Heating and cooling are the largest energy uses in most homes — space heating and air conditioning took just over half of a typical U.S. household’s annual energy use in 2020, according to the U.S. Energy Information Administration — so finding where that heated and cooled air escapes is usually the fastest way to lower your bills.

What an Energy Audit Actually Finds

An audit answers one question: where is the energy you pay for going instead of keeping you comfortable? Most homes lose it in the same few places. Air leaks around windows, doors, and where pipes and wires pass through walls. Missing or thin insulation in the attic and walls. Leaky ductwork that dumps heated or cooled air into the attic or crawl space before it reaches a room. Old or poorly maintained heating and cooling equipment. And windows that lose heat in winter and gain it in summer.

The U.S. Department of Energy puts duct losses at 20 to 30 percent in a typical home — a striking figure, because ductwork is out of sight and easy to forget. A house can also lose a large share of the air it pays to heat or cool straight through gaps in its shell. The point of an audit is not to find one culprit but to rank the problems, so you fix the ones that pay back first instead of the ones that are easiest to see.

If you are thinking about new equipment as well, our energy-efficient appliances overview explains how to judge efficiency when you replace something, and our clothes dryer buying guide shows the same thinking applied to one appliance. An audit tells you whether the equipment is even the problem — often it is the house around it.

Start With a DIY Walk-Through

You can do the first pass yourself in an afternoon, and it costs nothing. Go through the house with a notebook and look for the things an auditor would look for.

  • Read your bills first. Pull 12 months of electricity and gas bills. Look for the months your use spikes and compare with the same month last year. A bill that climbs while your habits stay the same is a clue something has changed — a failing appliance, a duct that has come loose, or insulation that has settled.
  • Find the drafts. On a windy day, hold a lit incense stick or a thin strip of tissue near windows, doors, electrical outlets on outside walls, and where pipes enter the house. If the smoke wavers or the tissue flutters, air is moving through a gap. Check the attic hatch and the basement rim joist too — those are classic leak spots that never show up in a quick look around the living room.
  • Look at the insulation. In the attic, insulation should cover the floor evenly, with no bare patches and no gaps around lights, vents, and chimneys. If you can see the ceiling joists poking through, the layer is thin. In the walls, you cannot see inside without a camera, but cold patches on an outside wall in winter are a sign worth noting for the professional visit.
  • Check the equipment. Look at the age and condition of your furnace, boiler, heat pump, or air conditioner, and your water heater. If the water heater is the weak point, our guide to the questions to ask before buying a heat-pump water heater covers the site checks that decide whether one fits your home. Dust, rust, and soot around a combustion appliance are worth flagging. Check the filter on a forced-air system — a clogged filter makes the system work harder for the same heat. A smart thermostat can help you see when your system runs and whether its schedule matches your life, but it cannot fix a leaky house.
  • Look at the ducts. Where you can reach them — basement, attic, crawl space — look for disconnected joints, crushed sections, and gaps sealed with old tape that has dried out. Ducts in unconditioned spaces lose the most, so note where they run.
  • Note the windows and doors. Condensation between double panes means the seal has failed. Doors that rattle or show daylight around the edges need weatherstripping. Single-pane windows are a weak point, but replacing them is expensive — an audit helps you judge whether air sealing and insulation pay back sooner.

Write down everything you find, room by room. That list is what turns a vague feeling — “the house feels drafty” — into a plan, and it is also useful to hand to a professional auditor so they know what you already noticed.

What a Professional Audit Includes

A professional audit builds on your walk-through with measurements you cannot do by eye. Look for an auditor certified by the Building Performance Institute (BPI) or a similar body, and ask what the audit covers before you book. A full audit usually takes a few hours, depending on the size of the home, and ends with a written report.

  • Bill review and interview. The auditor reviews your energy bills and asks about comfort problems — cold rooms, hot rooms, drafts, dampness — because your experience points to where the problems are.
  • Blower door test. This is the centrepiece. The auditor seals a powerful fan into an exterior door frame and depressurises the house, so outside air rushes in through every gap. A gauge measures the leakage rate, usually as air changes per hour. The number itself matters less than what the auditor finds while the fan runs: walking through the house with a smoke pencil or an infrared camera, they can pinpoint exactly where the air is coming in.
  • Infrared camera scan. A thermal camera shows temperature differences behind walls and ceilings, revealing missing insulation, air leaks, and damp spots that no eye can see. It is most useful on a cold day, when the gap between inside and outside temperatures is large.
  • Duct leakage test. A duct blaster pressurises the duct system and measures how much air escapes through gaps and cracks. Given the 20 to 30 percent duct losses the DOE cites for a typical home, this test often explains a surprisingly large share of a high bill.
  • Combustion safety check. If you have gas appliances, the auditor checks for carbon monoxide leaks and whether the appliances vent properly — a safety check as much as an efficiency one.
  • Home Energy Score. The DOE’s Home Energy Score rates a home’s energy use on a one-to-ten scale, with ten the most efficient. Some auditors include it in the report; it gives you a single number to compare before and after improvements.

Costs vary widely by region and home size, and the price of the audit itself is the wrong thing to focus on — the report’s value is in the order it gives you. Before you pay, check with your utility: many utilities offer free or discounted audits, or rebates on the improvements an audit recommends.

Reading the Report: What to Fix First

A good report ranks improvements by payback — how much each fix saves against what it costs — not by how impressive it sounds. The usual order surprises people who expect new equipment at the top.

Air sealing comes before insulation. Sealing gaps around windows, doors, pipes, and the attic floor stops conditioned air from escaping; adding insulation on top of a leaky shell is like wearing a thick coat with the zipper open. This is the single most common finding in audits, and it is also one of the cheapest to fix.

Insulation comes next, usually starting with the attic, where heat rises and escapes in winter. Then ducts, especially ducts running through unconditioned spaces. Then windows and doors — but note the order: weatherstripping and sealing a window costs far less than replacing it, and the audit tells you whether replacement would ever pay for itself.

Equipment comes last, unless something is failing or unsafe. A new furnace in a leaky house still heats the outdoors. Once the shell is tight and insulated, the right-sized replacement equipment is smaller and cheaper to run than the oversized unit the leaky house needed.

Some improvements pay back through comfort as much as money: fewer drafts, fewer cold rooms, and a house that holds its temperature overnight are benefits a bill does not show. When you weigh a fix, count those too.

After the Audit: Keep the Momentum

Do the cheap fixes first and measure the difference. A month of bills after air sealing tells you more than any estimate. Keep the audit report — it is the baseline for the next round of work, and it is useful if you sell the house, since buyers increasingly ask about energy performance.

Set a reminder to repeat the walk-through once a year: caulk shrinks, weatherstripping wears out, and a duct joint can work loose over a winter. An audit is not a one-time event; it is the start of paying attention to the house as a system. Green Home Basics takes the same whole-house view, with eco-friendly solutions for energy, materials, water and indoor air in every room. If your audit pointed to insulation or sealing work, that work is the natural next step — and it is where the money you found in the audit turns into money saved.

FAQ

How do I do a home energy audit myself?

Start with a walk-through: review 12 months of bills, hunt for drafts with an incense stick or tissue, check attic insulation depth, look at ducts you can reach, and note equipment age and condition. That finds the biggest problems for free. A professional audit adds the blower door test, infrared scan, and duct leakage test, which measure what you cannot see.

Where does a home lose the most energy?

Heating and cooling dominate: space heating and air conditioning took just over half of a typical U.S. household’s annual energy use in 2020 (EIA). The leaks are air gaps, missing insulation, and ductwork — the DOE puts duct losses at 20 to 30 percent in a typical home.

What is a blower door test?

A calibrated fan sealed into an exterior door frame depressurises the house, and a gauge measures how fast outside air rushes back in through gaps. It measures the home’s overall leakiness and, combined with a smoke pencil or infrared camera, shows the auditor exactly where the leaks are.

Is a professional energy audit worth it?

Usually, yes — if you act on the report. The audit itself finds and ranks the problems; the value is in fixing them in the right order, starting with air sealing. Check with your utility first: many offer free or discounted audits and rebates on the recommended work.

How long does an energy audit take?

A professional audit with a blower door test and infrared scan usually takes a few hours, depending on the size and complexity of the home. Your own walk-through takes an afternoon. Either way, allow time for the written report, which is the part you will actually use.

Should I replace my windows or insulate first?

Almost always insulate and air-seal first. Sealing gaps and adding attic insulation cost far less than window replacement and usually pay back sooner. An audit tells you whether your windows are actually a major loss or just the most visible suspect.

Sources: U.S. Department of Energy (home energy audits, blower door testing, duct losses, Home Energy Score); U.S. Energy Information Administration (2020 residential energy consumption: space heating and air conditioning share); ENERGY STAR (home performance guidance). Cost and availability of audits and rebates vary by utility and region; check with your local utility. Fact-check date: November 21, 2026. Cover photo: a blower door test fan sealed into a doorway, by Still_life_with_noodles, CC BY-SA 4.0, via Wikimedia Commons.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *